HS Code: 8414809090
Externally heated regenerative desiccant air dryer is developed based on the successful design of the heatless type and heated type desiccant air dryers. The purge air is pre-heated before regeneration to reduce its required capacity in order to achieve an energy saving. It avoids the disadvantage of short switching period of heatless type desiccant air dryer, and at the same time it consumes much less heating energy like heated type desiccant air dryer. This is the energy saving desiccant air dryer you can rely on!
This series of desiccant dryer incorporates the working principles of pressure swing adsorption and temperature swing adsorption. Desiccant absorbs water moisture in drying column and being regenerated with high quality dried and heated purge air in regeneration column by air thermal diffusion and high pressure difference mechanisms.
heatless regeneration compressed air dryer is based on the principle of PSA, use porous desiccant to adsorb water molecules for compressed air. drying the
+ Imported PLC intelligent controller, stable and reliable.
+ Flange filling mouth, easy replacement.
+ Unique endoscopy design, easy supervise for operation.
+ Advanced pneumatic valve ensure more than one million times of continuous use .
+ Special airflow diffuser to ensure the using life of the desiccant.
+ Working Pressure: 0.4～1.0MPa（1.0～3.0MPa is available）
+ Dew Point: -40℃（-40℃～-73℃MPa is available）
+ Inlet Air Temperature: ≤50℃
+ Regeneration Gas Consumption:≤12%
+ Pressure Loss:≤0. 02MP
+ Operating cycle : 4～10 min